EVO MODULES

Sort By:  
MAGELLAN 2-Way Remote Control
R687
REM3
REM3 Magellan Remote Control
R1,000
REM101 Emergency/Panic Remote Control
R440
PBox Plastic Enclosure
R155
Metal Panel Box 20cm
R174
Metal Panel Box 28mm
R236
Wireless Expansion Module
R2,154
Wireless Expansion Module 433MHz
R1,862
4-PGM Expansion Module
R1,021
Direct Connect Interface
R831
USB 5M Cable for 307USB
R80
2-Way Wireless PGM
R1,200
Switching PSU - Non Monitoring
R274
Integration Module (Only EVO Systems)
R1,419
Hub and Bus Isolator (Only for EVO Systems)
R1,065
Monitored Power Supply (Only for EVO Systems)
R958
ZX8
8-Zone Expansion Module Compatible on All Panels
R999
REM25
R25 Two-way Wireless Remote Control
R687
GPRS/GSM Communication Module
R1,987
Wireless Siren & Strobe Light
R1,725
REM2 (MN3705)
MAGELLAN 2-Way Remote Control with Back-light Buttons

Features
  • System Status Memory: The REM2 will keep the last system status received from the control panel in memory. Momentarily press the Info button to display the last system status--even when out of range. Used to confirm the last action you did on the system while away from the system.
  • Built-in transceiver (433MHz or 868MHz)
  • Displays system status using visual (LED) and auditory feedback
  • Press the Status button at any time to receive the system status
  • Perform up to 6 different actions per remote control
  • Compact, water-resistant design with back-light for buttons
  • Wireless range in a typical residential environment:
    - 30m (100ft) with MG6160 / MG6130
    - 45m (150ft) with MG5000 / MG5050 / RTX3
MAGELLAN 2-Way Remote Control
R687
REM3
REM3 (MN3712)
REM3 Magellan Remote Control

Features
  • Compatible with MG5000, MG5050, and Spectra SP series V3.00 (or higher) and RTX3 V1.31 (or higher)
  • System Status Memory: The REM3 will keep the last system status received from the control panel in memory. Momentarily press the Info button to display the last system status--even when out of range. Used to confirm the last action you did on the system while away from the system.
  • Configure which partitions the REM3 arms/disarms
  • Built-In Transceiver (433MHz or 868MHz)
  • Independent Arm, Sleep, Stay and Off buttons and LED display per partition
  • Control up to 6 PGMs and/or generate panics
  • Keypad Mode: Requires code entry
  • Remote Mode: One-touch arming / Disarming
  • Installer Diagnostic Mode:
  • Partition 1 LEDs = Signal Strength Display
  • Partition 2 LEDs = RF Interference Display
  • Provides visual and auditory feedback of system status
  • Press the Status button to receive system status
  • Label to identify remote control owner
  • Compact, water-resistant design
  • Size: 8cm x 3.4cm x 1.5cm (3.1in x 1.3in x 0.6in)
REM3 Magellan Remote Control
R1,000
REM101 (MN3714)

REM101 Emergency/Panic Remote Control

Features

  • Water resistant
  • Panic function allows user to instantly send panic signal to monitoring station
  • Manually-activated battery test function
  • Visual indicator (LED) for arming actions and battery testing
  • Includes lanyard attachment to facilitate portability; optional wrist strap and belt clip also available
  • Includes easily-replaceable CR2032 battery, with a battery life of 3 years
  • Available in 2 colors: black and white
  • Wireless range in a typical residential environment:
    - 30m (100ft) with MG6130 / MG6160 / MG6250 and RX1
    - 45m (150ft) with MG5000 / MG5050, K32LX and K641LX
    - 60m (200ft) with RTX3
  • Available in 433 or 868 MHz
REM101 Emergency/Panic Remote Control
R440
PBox (MN1006)
Features
  • PBox Plastic Enclosure
  • Most Expanders and PGM modules made to fit in box
  • For use with ZX8SP, ZX8, PRT1, PGM4 
PBox Plastic Enclosure
R155
Metal Panel Small (MN1007)
Features
  • Provision for multiple module and panel mounting
  • Many punch-out holes for simple wiring
  • Easy door removal
  • Convenient sizes:
    - 28cm X 28cm X 7.6cm
Metal Panel Box 20cm
R174
Metal Panel Big (MN1005)
Features
  • Provision for multiple module and panel mounting
  • Many punch-out holes for simple wiring
  • Easy door removal
  • Convenient sizes:
    - 28cm X 28cm X 7.6cm
Metal Panel Box 28mm
R236
RTX3 R25 (MN3809)

Features

  • Compatible with Spectra SP Series, Digiplex and Digiplex EVO
  • 32 wireless zones (Spectra SP and EVO only)
  • Maximum number of remote controls: 8 w/Esprit, 32 w/SP, 999 w/EVO
  • Remote control compatibility
    - EVO: REM1, REM2
    - SP: REM1, REM2, REM3
  • Wireless PGMs (8 w/EVO, 16 w/SP)
  • Functions with all MAGELLAN transmitters including 2WPGM
  • Supports two RPT1 and eight K32LRF / K32IRF (Spectra SP only)
  • In-field firmware upgradeable via CV4USB and Winload
  • RF jamming supervision
  • Low battery, tamper and check-in supervision
  • Transmitter signal strength display
  • 3 PGM outputs and 1 optional output
  • Noise level test and indicator
Wireless Expansion Module
R2,154
RTX3 R15 (MN3813)

Features

  • Compatible with Spectra SP Series, Digiplex and Digiplex EVO
  • 32 wireless zones (Spectra SP and EVO only)
  • Maximum number of remote controls: 8 w/Esprit, 32 w/SP, 999 w/EVO
  • Remote control compatibility
    - EVO: REM1, REM2
    - SP: REM1, REM2, REM3
  • Wireless PGMs (8 w/EVO, 16 w/SP)
  • Functions with all MAGELLAN transmitters including 2WPGM
  • Supports two RPT1 and eight K32LRF / K32IRF (Spectra SP only)
  • In-field firmware upgradeable via CV4USB and Winload
  • RF jamming supervision
  • Low battery, tamper and check-in supervision
  • Transmitter signal strength display
  • 3 PGM outputs and 1 optional output
  • Noise level test and indicator
Wireless Expansion Module 433MHz
R1,862
PGM4 (MN3806)

Features

  • Compatible with E65 (V2.00), SP6000 (V3.00), MG5050, & EVO
  • 4 fully programmable 5A relay outputs
  • Deactivate PGM after event and/or timer
  • Pulse PGM output for fire alarms
  • In-field firmware upgradeable
4-PGM Expansion Module
R1,021
307USB (MN1187)

Features

  • Incorporates a USB port and a serial port (DB-9)
  • Enables control panel to communicate with a PC at 60m (200ft)
  • Connect from the control panel’s serial port connector to a PC’s serial (DB-9) or USB port
  • Includes 3 LED status indicators (PC, Panel and RX/TX)
  • Communication speed:
    - 57.6k baud (MAGELLAN)
    - 38.4k baud (EVO)
    - 9.6k baud (MG series and Spectra SP series)
Direct Connect Interface
R831
USB 5M Cable (MN1182)

USB 5M Cable

Use with 307USB Direct Connect Interface

USB 5M Cable for 307USB
R80
2WPGM (MN3710)

Features

  • 2-way communication allows the 2WPGM to receive commands from MAGELLAN Transceivers and then confirm the command
  • Backup Alarm Reporting option (activates PGM output if communication between the MAGELLAN All-In-One-Consoles and the 2WPGM is lost)
  • 1 fully programmable 5A relay output
  • Deactivate PGM after event or timer
  • Requires an AC or DC input voltage (6Vac to 16.5Vac or 5Vdc to 30Vdc)
  • Can be powered by the PA12
  • Universal transmitter input (N.O./N.C.)
  • Wireless range in a typical residential environment:
    - 35m (115ft) with MG6250
    - 70m (230ft) with MG5050
  • Available in 433MHz or 868MHz
  • Dimensions: 12.5cm x 4.6cm x 2.5cm
2-Way Wireless PGM
R1,200
PS817 (MN1650)
Features
  • 13.8Vdc, 1.75A switching power supply
  • Fuseless electronic protection with automatic restore
  • Automatic transfer to backup battery power
  • Second backup battery connector (optional)
  • Battery test input
Switching PSU - Non Monitoring
R274
PRT3 (MN3567)
Features
  • In-field firmware upgradeable via a CONV4USB and WinLoad
  • Supports ASCII / C-BUS protocols
  • 16 virtual inputs to trigger an action in the EVO control panel based on an event received from the peripheral system using ASCII or C-BUS protocol
  • 30 virtual PGMs to trigger an action in the peripheral system using ASCII or CBUS protocol based on an event received from the EVO control panel
  • USB port for PC connections
  • Provides an interface between an EVO control panel and a third party peripheral system
  • Automatically/manually print reports of zones/systems event via printer and/or PC
  • Parallel and serial port for printer connections
  • Assign to one or more partitions
  • 2048 event buffer
  • Available in English, French, Spanish or Portuguese
Integration Module (Only EVO Systems)
R1,419
HUB2 (MN5363)

Hub and Bus Isolator (Only for EVO Systems)

Feature

  • Divide the bus into two completely isolated outputs (if one output fails, the other will continue to function)
  • One input port, 2 completely isolated output ports
  • Each output port provides communications up to 900m (3000ft)
Hub and Bus Isolator (Only for EVO Systems)
R1,065
PS17 (MN5362)
Monitored power supply module for EVO192 control panels

Feature
  • 1.7A switching power supply
  • Fully supervised (AC, battery, low battery and auxiliary limit)
  • Selectable battery charge current (350mA/850mA)
  • 1 x PGM output
Monitored Power Supply (Only for EVO Systems)
R958
ZX8 (MN3558)
Features
  • Compatible with MG Series, SP Series, and Digiplex EVO
  • Add 8 zones
  • Selectable input resistors for EOL and Tamper
  • 1 PGM output
  • Use zone input as an anti-tamper switch input
  • Support selectable EOL with V6.0
8-Zone Expansion Module Compatible on All Panels
R999
REM25
REM25 (MN3706)
REM25 Two-way Wireless Remote Control

Features
  • Performs six different actions such as arming and disarming your system, enabling and disabling PGMs and providing system status
  • Secured encrypted disarm function
  • Action instant confirmation
  • System status display
  • Provides system status memory
  • Displays system status using visual (LED) and auditor feedback
  • Supports StayD
  • Available in 433 MHz or 868 MHz
  • Water resistant
  • Easily replaceable long-life lithium battery that lasts for years with normal operation use
R25 Two-way Wireless Remote Control
R687
PCS250 (MN3816)
Features

  • Compact, sleek design
  • Report events to the IPR512 GPRS/IP Monitoring Receiver and/or IPRS-7 IP/GPRS PC Receiver Software
  • Report via text message (up to 16 cell phone numbers)
  • Control panel communication supervision
  • End-user can arm or disarm the system by sending a text message (SMS) to the PCS250
  • Simple installation with 4-wire serial connection
  • Optional rod antenna can be installed up to 18m (60ft) from the module using optional antenna cable extensions depending on the local signal strength
  • 128-bit (MDS) and 256-bit (AES) encryption (GPRS mode)
  • Increase the distance between the panel and the PCS250 module with an RS485 link (GSM mode only via e-bus). A CVT485 module must be added to the panel in order to accomplish this
  • Report via GSM (CID, SIA)
GPRS/GSM Communication Module
R1,987
SR130 (MN3814)

The SR130 is a weatherproof (IP54) and fully supervised wireless siren with a built-in strobe light. SR130 provides fast response to alarm signals with differentiation between intrusion and fire events.

Features

  • Compatible with MG/SP Series V4.0 or higher (except SP4000) when using an RTX3 V1.5 or higher as well as with MG6250 v3.0 and higher
  • Battery operated (3 "C" alkaline batteries) Weather-resistant design with UV protection
  • 2-way, fully supervised communication with the control panel
  • 100dB Piezo siren
  • Separate alarm notifications for intrusion and fire
  • Dual-tamper detection (cover and wall)
  • Squawk functionality
  • Wireless range in a typical residential environment: Up to 70m (230 ft)
  • Strobe lens available in 3 colors (red, blue, and amber)
  • Fully powered using three 1.5 Vdc type "C" alkaline batteries (included)
  • Signal strength/RF transmission and status LED
  • Operating temperature: -25ºC to 55ºC (-13ºF to 131ºF)
  • RF frequency: 433MHz or 868MHz
  • Dimensions: 13.4cm x 21.17cm x 5.1cm (5.29in x 8.34in x 2.01 in)
Wireless Siren & Strobe Light
R1,725
Per Page      1 - 20 of 22

Bestsellers